| American Society of Civil Engineers - 1897 - 466 страници
...spaced as indicated on the detailed plans. " The longitudinal seams shall be united by two butt straps, one on the inside and the other on the outside of the pipe. The outer strap shall be 11 ins. wide and the inner 16j ins. " The longitudinal joints shall... | |
| Virendra Nath Sharma - 1995 - 378 страници
...these, the (two) rings remain in contact with the ecliptic. These two represent latitude circles— one on the inside and the other on the outside (of the ecliptic). "Similarly, pivot a ring, a little bigger than the others, to the pins at the poles (of... | |
| Lyn Goldberg - 2001 - 270 страници
...on top of the thigh and sweep up to the groin area. Return the hands to the starting position with one on the inside and the other on the outside of the leg in the same way and repeat two or three times. REMEMBER Move your weight from back foot to front... | |
| Eric Gray Forbes, Lesley Murdin, Frances Wilmoth - 2001 - 1114 страници
...Index as in yours that Shews the parts of a revolv upon its limb to 100, under which (by two wheels, one on the inside and the other on the outside of the Plate concentrick therwith) is turnd another Index which upon the same divisions Numbers the revolves... | |
| Peter Cozzens - 2001 - 950 страници
...fastened a tourniquet, which held two strips of adhesive plaster about three inches wide, fastened one on the inside and the other on the outside of the leg, and extending up to where the bone was broken. On the left side of the box was screwed an iron... | |
| Franklin Institute (Philadelphia, Pa.) - 1893 - 644 страници
...grinding and shaping its cutters. The work was done by revolving discs and cylinders of copper, fed with plates as I did the long one, and put one on the inside...the hoop, whose ends were brought together, and put two or three screw-pins, with flat heads and nuts to them, into each end which held them together till... | |
| 1909 - 1024 страници
...in the following manner: Two measurements of length are made from the poll to the tip of the horn, one on the inside and the other on the outside of the horn. An average of these is taken and the results represent the length of the horn. The circumference... | |
| Institution of Civil Engineers (Great Britain) - 1859 - 614 страници
...strain, as much as possible, on both skins. These attachments are also placed opposite each other, one on the inside and the other on the outside of the gate, so that the bolts pass from one to the other. In the lower gates they are at a height of 1 2... | |
| 1869 - 592 страници
...extends as a large fungating mass into the cavity of the mouth. This mass is divided into two lobes, one on the inside and the other on the outside of the alveolar process. The inner lobe is attached to the internal aspect of the alveolar process, and communicates... | |
| |