Mining: An Elementary Treatise on the Getting of Minerals

Предна корица
Longmans, Green & Company, 1893 - 519 страници

Между кориците на книгата

Други издания - Преглед на всички

Често срещани думи и фрази

Популярни откъси

Страница 518 - Crown 8vo. , 2s . 6d. GEOMETRICAL DRAWING FOR ART STUDENTS. Embracing Plane Geometry and its Applications, the Use of Scales, and the Plans and Elevations of Solids, as required in Section I.
Страница i - City and Guilds of London Institute. With 199 Diagrams. 8vo. 12s. net. LUPTON— Mining : an Elementary Treatise on the Getting of Minerals. By ARNOLD LUPTON, MICE, FGS, &c., Mining Engineer, Certificated Colliery Manager, Surveyor, &c.
Страница 518 - ELEMENTARY SCIENCE MANUALS. Written specially to meet the requirements of the ELEMENTARY STAGE OF SCIENCE SUBJECTS as laid down in the Syllabus of the Directory of the SCIENCE AND ART DEPARTMENT.
Страница 518 - ELEMENTARY SCIENCE MANUALS. *,* Written specially to meet the requirements of the ELEMENTARY STAGE OF SCIENCE SUBJECTS as laid down in the Syllabus of the Directory of the BOARD OF EDUCATION.
Страница 322 - The results found in this way, separately for white and colored persons of each sex, are shown in the table on the following page. It will be observed that most of the causes of death are selective in the age periods at which they are concentrated.
Страница 113 - FIG. 442. work. This slide being say 18 inches long, the hole can be drilled that depth. When this depth is reached the screw is reversed, the drill drawn out of the hole, and a longer drill placed in the hole and fastened to the piston. The second drill is rather narrower than the first, so that it will not catch on the sides of the hole. When the entire length of this drill has been bored, if it is still necessary to go deeper, a third and then a fourth drill can be...
Страница 518 - BUILDING CONSTRUCTION. By EDWARD J. BURRELL; Teacher of Building Construction at the Technical School of the People's Palace, Mile End. Fully Illustrated with Working Drawings. Crown 8vo.
Страница 113 - ... work. This slide being say 18 inches long, the hole can be drilled that depth. When this depth is reached the screw is reversed, the drill drawn out of the hole, and a longer drill placed in the hole and fastened to the piston. The second drill is rather narrower than the first, so that it will not catch on the sides of the hole. When the entire length of this drill has been bored, if it is still necessary to go deeper, a third and then a fourth drill can be added. Percussion drills may be used...
Страница 46 - ... periphery. A portion of the circular line is called an arc, eg abc (fig. 39). The size of an arc with reference to the whole circumference is measured by degrees. Every circle is divided into 360 equal parts, which are called degrees ; each degree contains 60 minutes, and each minute 60 seconds.
Страница 518 - A MANUAL of MECHANICS : an Elementary Text-Book designed for Students of Applied Mechanics. By TMGOODHVE, MA a*.

Библиография